December 2nd, 2011

These images were grabbed here;
http://msevm.com/2010/02/hv.htm

Translated this text off that web page;


QUOTE
beam of 110 ° used standardized transformers horizontal scanning part types: FA-110 FA-110M, TVS-110A, TVS-half mile, TVS-NOLA, TVS-I0L1, TVS-110L2, TVS-crawling, TVS-110L4, TVS-TS0P2 , TVS-IOPZ, TVS-110L5, etc. All part types considered FAs are used in televisions black and white images.

Transformers are manufactured in climatic design UHL category 4.2 with normal and high moisture resistance. Operating conditions of transformers is discussed above.

The output transformers FA-110 is used in tube TVs stages of line scanning in black and white CRT with 43LK9B, 43LK11B, 53LK6B complete with yoke OC-110.

The general form, overall and mounting dimensions of the transformer FA-110 is shown in Fig. 8.9. The electrical circuit of the transformer is shown in Fig. 8.10.

Winding data for unified TVS television in black and white images are shown in Table. 8.6.

The design of the transformer is designed for mounting on a bracket unit developments with additional screw-MH. In the FA-110 is used ferrite magnetic core-headed U-shaped structure, consisting of two halves, glued together ferroplastom. In the magnetic gap is absent. Bulk installation to hard conclusions osuschestalyaetsya board at the top of the transformer.

TVS findings withstand without damage effect of mechanical stress, values ??and types of which are given above.

Signal output transformers FA-PAO used in the tube stages of line scanning of TV receivers in black and white, in

ZTS18P

UNQUOTE

wattsup